RF & wireless
OURS Project
by evanman83
Step-by-step instructions to build a smartphone that is open-source, upgradeable, repairable, and Big Tech free.
Loading…
Download ProtoFlowby evanman83
Step-by-step instructions to build a smartphone that is open-source, upgradeable, repairable, and Big Tech free.
by OpenDrone-hw
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.
by tejeez
Synchronized RTL-SDR receivers and direction finding
by Hydra-Designs
A minimalist 1W LoRA PCB design for Meshtastic-device firmware
by IgrikXD
A compact hardware device for transmitting WSPR messages based on the SI5351 clock generator, using GPS for transmission timing synchronization and automatic QTH locator calculation.
by alwynallan
Open RNG based on Modular Entropy Multiplication
by duerrfk
Key 2.0 is a Bluetooth IoT Door Lock. It turns a conventional electric door lock into a smart door lock that can be opened using a smartphone without the need for a physical key. Thus, Key20 is the modern version of a physical key, or, as the name suggests, the key version 2.0 for the Internet of Things (IoT) era.
by luciobaiocchi
Offline group-safety mesh for hikers: ESP32 + GPS + LoRa, with a firmware-in-the-loop simulator and 3D replay viewer
by jgromes
Universal wireless communication shield for Arduino
by hallard
Raspberry PI Lora Gateway/Node for RFM92/95/96/98/69HCW Modules
by MangoIV
A drop-in replacement-PCB for the beautiful le_chiffre
by SnapperGPS
Printed circuit board (PCB) design for snapshot GNSS receiver
by mfkiwl
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
by cheekiang
Indoor/Outdoor Positioning System framework based on Decawave's DWM1000 Ultra Wide Band transceivers
by GaudiLabs
Open Source Theremin Instrument, Shield PCB and Hardware description
by FaradayRF
Faraday hardware design files
by buserror
RF (433Mhz) to MQTT Bridge - with hardware
by h0lad
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
by hallard
ESP8266 WeMos Shield for Microchip LORAWAN RN2483 or RN2903
by valerionew
Random number generator based on radioactivity from bananas
by 4x1md
AFSK interface for Android smartphones and tablets.
by teapotlaboratories
Teapotlabs BWLR1E: Wireless Environmental Sensor with Energy Harvesting from Solar Energy
by septentrio-gnss
Mowi is an Open Source hardware project that combines a compact Septentrio's GNSS receiver mosaic with a wireless ESP32 Wrover module
by HamRadio360
K6BEZ Antenna Analyzer Build Project
by Tropaion
This is a ZigBee device to collect data from smartmeters using the DLMS/COSEM protocol.
by blemasle
Connected GPS tracker PCB
by lab11
Code, hardware, and instructions to use the TI CC2520 with the Raspberry Pi.
by kalinchuk
Wireless tally light system for ATEM switchers.
by CITCEuraRFID
This repository is deprecated. Please go to https://github.com/RayBor/KeyDuino for the up-to-date version.
by attexx
RFM9x Breakout Board
by b1scuitdev
E07xESP32C5 is a Sub-GHz & ESP32-C5 module for Flipper Zero. It includes an EBYTE E07-433M20S (PA+LNA), microSD slot, UART pads for GPS, 5V output and a 4-layer PCB with solid ground planes for RF performance.
by maelh
Radio frequency prototype boards (based on MegawattKS' design)
by nandfarm
PowerRiser – NVMe 2230 and 2242 Expansion board for Lenovo Tiny 5 Series
by sharebrained
Radio hardware and software projects.
by m3y54m
ESP32-S3-WROOM-1 Breakout Board
by al177
ESP8266 based Raspberry Pi WiFi module
by ignamv
Utility Kicad scripts
by GaudiLabs
Hardware files for the Open.Theremin project
by 4x1md
External bridge SWR meter for Yaesu FT-817ND and other QRP HF transceivers.
by stanleyondrus
reTerminalEM is an open-source expansion module platform for reTerminal's high speed interface (PCIe X2, USB 2.0, POE, 2x I2C, 2x SPI, UART, and 11 GPIOs).
by MR-DOS
12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
by trackuino
Trackuino shield (Eagle schematic, PCB and gerber files)
by HABduino
This code depreciated use Flextrack instead https://github.com/daveake/FlexTrack
by MonkHelios
Raspberry Pi powered High Altitude Weather Balloon
by reportingsjr
RFID/NFC board with ethernet+PoE with numerous I/Os.
by jgromes
Arduino shield for various LoRa communication modules
by EmilioAL-Git
Open-source USB to WiFi HaLow (IEEE 802.11ah) adapter based on Morse Micro MM8108-MF15457 module.
by WVURAIL
Open source radio astronomy hardware
Each project belongs to its author and links to its original repository. Licences are summarised from repository metadata — read the licence in the project itself before manufacturing or redistributing a design.