EDA workflow guide library.
Step-by-step guides for import/export reliability, AI-assisted circuit generation, and repeatable review-ready PCB workflows.
- kicad pcb import export
Reliable KiCad Round-Trip Workflow in ProtoFlow
A practical KiCad workflow for importing into ProtoFlow, applying AI-assisted edits, validating with DRC/ERC, and handing back cleanly.
- ai circuit generator workflow
A Repeatable AI Circuit Generation Workflow That Ships
A practical workflow for AI circuit generation in ProtoFlow using real component search/import, validation checks, and clean handoff prep.
- how to make a pcb with ai
How to Make a PCB Schematic with AI (2026)
A practical, step-by-step guide to designing a PCB schematic with AI in 2026, from a plain-English prompt to real parts, validation, and a KiCad-ready export.
- kicad high speed pcb design
High-Speed PCB Layout in KiCad, Step by Step
A practical KiCad high-speed layout workflow: fabricator stackups, differential-pair routing, skew and length tuning, custom DRC rules, and where the limits are.
- ai routed pcb manufacturable
Is an AI-Routed PCB Actually Manufacturable?
A practical verification guide for AI-generated PCB layouts: what DRC catches, what DFM catches, what neither catches, and the checks that decide whether an AI-routed board is safe to fabricate.
- pcb design rules
PCB Design Rules and Guidelines: What to Set, What to Check
PCB design rules and guidelines that keep boards manufacturable and working: trace width and spacing, vias and annular rings, clearance, decoupling, ground planes, return paths, thermal relief, silkscreen — and how to turn them into DRC rules.
- esp32 schematic
ESP32 Schematic Design, From Reference Circuit to Board
How to design an ESP32 schematic that boots and programs reliably: 3.3 V power, decoupling, EN reset, strapping pins, auto-program circuit, USB-UART or native USB, antenna keep-out — plus how to draft it with AI and real parts.
- how to design a pcb
How to Design a PCB, Step by Step
A complete PCB design tutorial for 2026: requirements, schematic, real parts, ERC, board setup, placement, routing, DRC, silkscreen, Gerbers, and ordering — with free tools and the mistakes that cost first-time designers a respin.
