- Next standard value (E12)
- 18 µH
- Duty cycle at VIN(min)
- 34 % maximum, CCM
- Duty cycle at VIN(max)
- 29.6 % minimum, CCM
- Average inductor current
- 1.51 A at VIN(min)
- Inductor ripple at VIN(min)
- 454 mA peak to peak
- Inductor ripple at VIN(max)
- 484 mA peak to peak
- Peak inductor current
- 1.74 A also switch and diode peak
- Inductor saturation rating
- 2.09 A at least, 1.2 × peak
- Switch voltage
- 18.6 V VIN(max) + Vf + |VOUT|
- Switch RMS current
- 886 mA at VIN(min)
- Diode reverse voltage
- 18.2 V VIN(max) + |VOUT|
- Diode average current
- 1 A
- Diode dissipation
- 400 mW IOUT × Vf
- Output capacitance, minimum
- 16.5 µF effective, after DC bias
- Output capacitor RMS current
- 725 mA
- Input capacitance, minimum
- 8.74 µF effective, after DC bias
- Input capacitor RMS current
- 721 mA
- CCM boundary at VIN(max)
- 170 mA DCM below this load
- Right-half-plane zero
- 63.3 kHz estimate, at VIN(min) and full load
- Usable loop bandwidth
- 12.7 kHz about 1/5 of the zero
A buck IC used as an inverting buck-boost sees VIN + |VOUT| between its VIN and GND pins: 18.2 V here. Check its input rating against that, not against VIN alone.