BAT54T1G
by onsemi(安森美)Small signal rectification and clamping circuits often use a Schottky diode such as onsemi BAT54T1G. This record specifies a two-terminal SMD part with a SOD-123 land pattern. In the free KiCad files, the symbol has two pins and the SOD-123_L2.8-W1.8-LS3.7-RD footprint has two pads; a 3D model is included as well. The files come from a real ProtoFlow import that was converted and checked in the editor. Check polarity in both the schematic and the assembled board view when fitting the diode into a design. BAT54T1G can be opened directly in ProtoFlow.
Download KiCad files
Source: JLCEDA/EasyEDA Official Library (lceda.cn and easyeda.com). The symbol, footprint, 3D model and part data are © JLCEDA/EasyEDA; ProtoFlow converted them to KiCad format.
Use BAT54T1G in your design
ProtoFlow is a free, AI-native EDA tool. Drop this part onto a schematic, route a PCB, and let the AI copilot help. The symbol, footprint, and 3D model come in linked and ready.
Free to start. macOS, Windows and Linux. No sign-up to try.
Related parts
All Diode & Transistor partsFree calculators for BAT54T1G
All free electronics tools- Junction temperature calculatorJunction temperature from power and θJA or θJC, the maximum power for your ambient, and a derating curve.
- RC snubber calculatorRC snubber values from measured ringing frequency, using the add-a-capacitor method, plus the resistor power.
- Rectifier filter capacitor calculatorSmoothing capacitor for a half- or full-wave rectifier from load current and allowed ripple, with peak and ripple current.
- Heatsink calculatorMaximum heatsink thermal resistance for a part to stay below its junction limit, from power, θJC and the interface.

