Texas InstrumentsOfficial resources
EK-TM4C123GXL Tiva C LaunchPad
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
TM4C123GH6PM
View reference board Loading…
Download ProtoFlowManufacturer library
Exact board pages for widely used TI, ST, Espressif, Arduino, Raspberry Pi and Nordic hardware, linked to the manufacturer’s schematics and design resources.
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
A sub-1 GHz SimpleLink wireless MCU development kit built around the CC1310 for low power sensing and long range radio designs.
A multi-band SimpleLink development kit for the CC1352P wireless MCU, including sub-1 GHz and 2.4 GHz radios with an integrated power amplifier.
An STM32 Nucleo-64 board based on the STM32F401RE, with an integrated ST-LINK debugger and Arduino Uno compatible expansion headers.
An STM32F407 discovery board with audio, motion sensing, USB OTG and an integrated ST-LINK debugger for Cortex-M4 development.
Espressif’s classic ESP32 development board with Wi-Fi, Bluetooth, USB-to-UART and breadboard-friendly pin headers.
A compact Wi-Fi and Bluetooth Low Energy development board based on the RISC-V ESP32-C3-MINI-1 module.
A compact ESP32-S3 development board for Wi-Fi, Bluetooth Low Energy, USB and embedded AI experiments.
The 32-bit Arduino Uno board combining a Renesas RA4M1 MCU with an ESP32-S3 connectivity module and a built-in LED matrix.
The original RP2040 microcontroller board, with castellated edges, USB and exposed debug pins in a compact dual-inline format.
The RP2350-based successor to Pico, retaining the familiar form factor while adding more performance, memory and security features.
A multi-protocol nRF52840 development kit for Bluetooth Low Energy, Matter, Thread, Zigbee, NFC and proprietary 2.4 GHz designs.
by UzixLS
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
by UzixLS
10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure
by wodowiesel
LCRDT-Tester is an electronic component tester based on Arduino Nano v3 with internal reference incl. pcb schematics & code
by 4x1md
External bridge SWR meter for Yaesu FT-817ND and other QRP HF transceivers.
by OpenGammaProject
🎒 Carrier board for a 6 mm C-Series MicroFC-60035 silicon photomultiplier.
by ardiloot
ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).
by UzixLS
MOS SID sound card for ZX Spectrum
by heyitsyang
PCB to create an all-in-one AC wall wart + project
by Atlantix-EDA
Companion PCB Release & Manufacturing Tool for KiCad
by MakerPnP
Gerber X2 (compatible with Gerber RS-274X) code-generating library for Rust. Contributions welcome!
by tomtor
STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip
by OpenModbus
A compact industrial-grade 64-channel Modbus RTU output module.
by UzixLS
Extension board for Sizif-512
by vlovo
convert ODB++ pcb layout features to a svg file
by AShadyPCB
Silent 25 kHz H-bridge replacement for a whining 24V tunable white/orange LED shelf controller. STM32 + BLE, reverse engineered from the original, with scope and audio FFT documentation.
by rniwase
Nintendo Gameboy cartridge-shaped FPGA development board
by Eliot-Abramo
KiCad Action Plugin for managing multiple PCBs (“sub-boards”) from a single schematic (KiCad 10+).
by UzixLS
RGB to YPbPr converter
by MehverOSHW
基于树莓派4布局的底板，核心板为稚晖君 (@peng-zhihui) 的 Project Quantum 项目。| A shield (IO board) according with RBPi4, the core is @peng-zhihui 's Quark N.
by dsafdsaf132
High-performance Online Gerber Viewer
by wodowiesel
GB-Dumper is a PCB project for Gameboy cartridge dumps and backups via Arduino Nano on spi-bus & USB
by atoomnetmarc
Schematic, PCB files, firmware and 3d models for creating the IoT12 solder iron temperature controller for T12 compatible tips.
by UzixLS
Converts RGB + Sync analog signal to S-Video (and also Composite).
by KabukiFlux
MiSTer user port MIDI output and input PCB
by Alex-2-Graf
Leningrad-2. Russian ZX Spectrum clone (2025 Revision). Modernized schematic & PCB with onboard RGB2VGA/HDMI converter, AY-3-8910 sound, and expansion bus adapters.
by KabukiFlux
PCB form Megadrive/Genesis 2 RGB minidin to Scart adapter with 12V DCDC boost (4:3 switching)
by KabukiFlux
Small PCB mod to mix the sync in the RGBpi cable to solve sync issues
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.