EK-TM4C123GXL Tiva C LaunchPad
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
37 published boards whose schematic and layout source is public — KiCad, EAGLE, Altium and EasyEDA projects you can read, fork and build on. Every entry links to the original repository and names its licence.
Exact board pages for widely used TI, ST, Espressif, Arduino, Raspberry Pi and Nordic hardware, linked to the manufacturer’s schematics and design resources.
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
A sub-1 GHz SimpleLink wireless MCU development kit built around the CC1310 for low power sensing and long range radio designs.
A multi-band SimpleLink development kit for the CC1352P wireless MCU, including sub-1 GHz and 2.4 GHz radios with an integrated power amplifier.
An STM32 Nucleo-64 board based on the STM32F401RE, with an integrated ST-LINK debugger and Arduino Uno compatible expansion headers.
An STM32F407 discovery board with audio, motion sensing, USB OTG and an integrated ST-LINK debugger for Cortex-M4 development.
Espressif’s classic ESP32 development board with Wi-Fi, Bluetooth, USB-to-UART and breadboard-friendly pin headers.
A compact Wi-Fi and Bluetooth Low Energy development board based on the RISC-V ESP32-C3-MINI-1 module.
A compact ESP32-S3 development board for Wi-Fi, Bluetooth Low Energy, USB and embedded AI experiments.
The 32-bit Arduino Uno board combining a Renesas RA4M1 MCU with an ESP32-S3 connectivity module and a built-in LED matrix.
The original RP2040 microcontroller board, with castellated edges, USB and exposed debug pins in a compact dual-inline format.
The RP2350-based successor to Pico, retaining the familiar form factor while adding more performance, memory and security features.
A multi-protocol nRF52840 development kit for Bluetooth Low Energy, Matter, Thread, Zigbee, NFC and proprietary 2.4 GHz designs.

by GEIGEIGEIST
TOTEM is a 38 keys column-staggered split keyboard. It meant to be used with a SEEED XIAO BLE or RP2040

by mattdibi
Ergonomic split mechanical keyboard

by GEIGEIGEIST
KLOR is 36-42 keys column-staggered split keyboard. It supports a per key RGB matrix, encoders, OLED displays, haptic feedback, audio, a Pixart Paw3204 trackball and four different layouts, through brake off parts.

by tompi
An affordable split 36 keys keyboard

by cheyao
An ECP5 FPGA Dev Board in a Pi Zero form
KiCad sourceby pashutk
Split 36-key keyboard
KiCad sourceby Hanqaqa
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
by strangeparts
Flexible circuit board design for adding a headphone jack to an iPhone 7
KiCad sourceby raeedcho
a wireless-only split keyboard based on the chocofi

by ExpressLRS
Open-source PCB designs, schematics, and 3D-printable cases for ExpressLRS TX modules and receivers

by peej
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
KiCad sourceby soundmonster
Generated keyboard

by jibrilsharafi
Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)

by visrealm
A replacement for the classic TMS9918A/TMS9929A VDP, powered by a Raspberry Pi Pico
KiCad sourceby UzixLS
ZX Spectrum CPLD-based clone for rubber case
KiCad sourceby murexrobotics
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
by visrealm
The HBC-56 (65C02/TMS9918A/AY-3-8910 retro computer) fully emulated on a Raspberry Pi Pico
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.