Keyboards & input devices
TOTEM
by GEIGEIGEIST
TOTEM is a 38 keys column-staggered split keyboard. It meant to be used with a SEEED XIAO BLE or RP2040
Loading…
Download ProtoFlowby GEIGEIGEIST
TOTEM is a 38 keys column-staggered split keyboard. It meant to be used with a SEEED XIAO BLE or RP2040
by mattdibi
Ergonomic split mechanical keyboard
by GEIGEIGEIST
KLOR is 36-42 keys column-staggered split keyboard. It supports a per key RGB matrix, encoders, OLED displays, haptic feedback, audio, a Pixart Paw3204 trackball and four different layouts, through brake off parts.
by tompi
An affordable split 36 keys keyboard
by pashutk
Split 36-key keyboard
by raeedcho
a wireless-only split keyboard based on the chocofi
by kiibohd
PCB and PCB related bits
by peej
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
by soundmonster
Generated keyboard
by db-ok
Split wireless keyboard PCB based on the Sofle Choc keyboard
by siderakb
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta
by 4pplet
60% Bluetooth PCB using the nRF52840. MX, ALPS and SMK versions.
by mohoyt
Lagom is an easy to build 65% keyboard using a discrete microcontroller and only through hole components
by camrbuss
Super thin split PCB keyboard using rp2040 chips running Rust
by LouWii
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets
by siderakb
PMW3610 laser mouse sensor breakout board, support either 1.8V or 3.3V logic
by peej
A split ergo 4x5 keyboard with 3 thumb keys where each half is smaller than the 100x100mm cheap PCB production size.
by 4pplet
Multi layout 60% PCB with support for common ANSI and ISO layouts and split space. SE-version is for use in Polaris, DB-version for use in Bakeneko/Kei.
by zli117
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.
by ashpil
A modern yet simple Model M replacement controller
by keyzog
The Kapl is a split ergonomic keyboard with 70 keys (7x5)
by mohoyt
Litl is an easy to build 40% keyboard using only through hole components.
by BathroomEpiphanies
Tutorial on making keyboard PCB layouts in KiCAD
by buganini
KiCad Workspace / Panelizer / Build Variants / Differ / FreeCAD Bridge for PCB Bending & Assembly
by b-karl
65% keyboard PCB with ProMicro footprint. Through-hole kit design with focus on wireless.
by anarion80
Porcupine is an autogenerated, ergonomic, split, 36-42 key, wired/wireless, columnar-staggered keyboard
by parkergrt
75% Gasket Mechanical Keyboard Powered by QMK & VIA
by nglgzz
42 keys ergonomic keyboard
by badjeff
An open source breakout board for PixArt PAW3395DM-T6QU / PAW3950DM-T5QU low power optical mouse sensor.
by nekoewen
An easy-to-build QMK-powered stenography keyboard
by UzixLS
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure
by UzixLS
10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure
by Eliot-Abramo
KiCad Action Plugin for managing multiple PCBs (“sub-boards”) from a single schematic (KiCad 10+).
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.