Keyboards & input devices
TOTEM
by GEIGEIGEIST
TOTEM is a 38 keys column-staggered split keyboard. It meant to be used with a SEEED XIAO BLE or RP2040
Loading…
Download ProtoFlowby GEIGEIGEIST
TOTEM is a 38 keys column-staggered split keyboard. It meant to be used with a SEEED XIAO BLE or RP2040
by GEIGEIGEIST
KLOR is 36-42 keys column-staggered split keyboard. It supports a per key RGB matrix, encoders, OLED displays, haptic feedback, audio, a Pixart Paw3204 trackball and four different layouts, through brake off parts.
by beekeeb
The Piantor Keyboard is a beginner-friendly, easy-to-solder, 42-key or 36-key, diodeless, low profile aggressive column staggered, hotswappable and non-hotswappable, programmable ergonomic mechanical split keyboard powered by Raspberry Pi Pico or other compatible RP2040 boards. It is based on the Cantor Keyboard.
by peej
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
by soundmonster
Generated keyboard
by Envious-Data
A custom mechanical keyboard inspired by the CFTKB Mysterium utilizing the Raspberry Pi Pico
by ChrisChrisLoLo
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware
by ebastler
A wireless ergonomic keyboard
by camrbuss
Super thin split PCB keyboard using rp2040 chips running Rust
by LouWii
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets
by awende
A custom 4x4 keyboard plus two rotary encoders
by coarse
A modern guide to keyboard PCBs
by petercpark
A uni-board split ortholinear made for stenography. Uses QMK Firmware's Gemini Protocol. This is the pro micro version (aka Uni v2)
by anarion80
Porcupine is an autogenerated, ergonomic, split, 36-42 key, wired/wireless, columnar-staggered keyboard
by sporkus
Le Chiffre keyboard pcb with stm32F072
by parkergrt
75% Gasket Mechanical Keyboard Powered by QMK & VIA
by ast
Teensy (Arduino clone) 88 key velocity sensitive midi keyboard
by henrikh
A checklist for electronics and electrical design
by nekoewen
An easy-to-build QMK-powered stenography keyboard
by Electroner
Teclado Full ISO 105 Teclas español + PCB
by ISSUIUC
Building custom flight computers
by 4pplet
Steezy60 is a 60% PCB in two versions: one for SMK gen 2 switches one for ALPS-compatible switches. Compatible with standard tray-mount cases. BIG layout compatibility.
by ikajdan
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
by visrealm
Cherry MX compatible upgrade for your Texas Instruments TI-99/4A Mitsumi mylar keyboard
by dj505
A compact keyboard-style controller for Pump it Up
by makersmakingchange
An open-source mouth operated sip and puff joystick that enables people with limited hand function to emulate a mouse on their computer and/or smartphone.
by jyap808
58-key column staggered split keyboard
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.