Neoracer v2 is an open source motor control board published by Neobotics-Foundation-Inc, with its design files available on GitHub. The author describes it as: “3D-printable open-source chassis for autonomous racing in robotics education and research.”
41 people have starred it and 3 have forked it, with the last commit 5 months ago.
What’s in the repository
- Schematic and board source files published by the author
- Full revision history, so you can see how the board changed between versions
Licence and reuse
Released under CERN-OHL-S-2.0. Read the license file in the repository before reusing the design commercially; the terms are not one of the common permissive or copyleft templates.
Opening it in ProtoFlow
The repository does not clearly state which EDA tool produced the files — check the repository contents before planning an import.
- 01 Select “Edit in ProtoFlow” for opening options. Download the source and open supported KiCad files in the app. Other EDA formats may need conversion.
- 02 Work in the imported local copy: rename nets, swap parts against live distributor stock, re-route, or strip it back to the sub-circuit you actually need.
- 03 Keep the original licence and credit Neobotics-Foundation-Inc if you publish or sell what you build from it.
This page indexes a public repository. The design, the files and the copyright belong to Neobotics-Foundation-Inc; ProtoFlow does not host, mirror or verify them. Details are read from GitHub and refreshed periodically — check the repository for the current state of the project.
