TPD4E02B04DQAR
by TI(德州仪器)ESD protection belongs close to the signals it protects, so the package layout matters when placing TI's TPD4E02B04DQAR on a PCB. This device is a surface-mount ESD protector in a USON package. Its downloadable KiCad files provide a ten-pin symbol, the ten-pad USON-10_L2.5-W1.0-P0.50-BL footprint, and a 3D model for reviewing the board assembly. The files were converted from a real ProtoFlow import and checked in the editor. Use the symbol and footprint together when laying out protected signal paths and reviewing the device connections. The part is also available to open directly in ProtoFlow.
Download KiCad files
Source: JLCEDA/EasyEDA Official Library (lceda.cn and easyeda.com). The symbol, footprint, 3D model and part data are © JLCEDA/EasyEDA; ProtoFlow converted them to KiCad format.
Use TPD4E02B04DQAR in your design
ProtoFlow is a free, AI-native EDA tool. Drop this part onto a schematic, route a PCB, and let the AI copilot help. The symbol, footprint, and 3D model come in linked and ready.
Free to start. macOS, Windows and Linux. No sign-up to try.
Related parts
All Diode & Transistor partsFree calculators for TPD4E02B04DQAR
All free electronics tools- Junction temperature calculatorJunction temperature from power and θJA or θJC, the maximum power for your ambient, and a derating curve.
- Ohm's law calculatorEnter any two of voltage, current, resistance and power to get the other two, with metric prefixes.
- RC snubber calculatorRC snubber values from measured ringing frequency, using the add-a-capacitor method, plus the resistor power.
- Rectifier filter capacitor calculatorSmoothing capacitor for a half- or full-wave rectifier from load current and allowed ripple, with peak and ripple current.

