LAUNCHXL-CC1352P LaunchPad
A multi-band SimpleLink development kit for the CC1352P wireless MCU, including sub-1 GHz and 2.4 GHz radios with an integrated power amplifier.
Manufacturer library
Exact board pages for widely used TI, ST, Espressif, Arduino, Raspberry Pi and Nordic hardware, linked to the manufacturer’s schematics and design resources.
A multi-band SimpleLink development kit for the CC1352P wireless MCU, including sub-1 GHz and 2.4 GHz radios with an integrated power amplifier.
A multi-protocol nRF52840 development kit for Bluetooth Low Energy, Matter, Thread, Zigbee, NFC and proprietary 2.4 GHz designs.

by cyijun
An open source Zstack3 gateway powered by ESP8266 and CC2652 modules

by Tropaion
This is a ZigBee device to collect data from smartmeters using the DLMS/COSEM protocol.

by Kampi
Zigbee environment sensor device with Zigbee2MQTT support.

by klein0r
Just a simple hat to connect a USR-TCP232-T2 TTL to the CC26X2R1
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.