
Redox Keyboard
by mattdibi
Ergonomic split mechanical keyboard

by mattdibi
Ergonomic split mechanical keyboard

by OpenGammaProject
☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.
by botletics
Arduino-compatible wireless reflow oven controller ecosystem of open-source hardware

by siderakb
PMW3360 optical mouse sensor breakout board, support both 3.3V and 1.8V logic

by siderakb
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

by jblang
TMS9918A video card for RC2014

by tebl
A PCB being made while watching Ben Eaters "Build a 6502 computer" video series. Includes the computer itself, a standalone slow clock and an Arduino Mega shield for the bus monitor sketch..

by siderakb
PMW3610 laser mouse sensor breakout board, support either 1.8V or 3.3V logic

by amiryeg
How to design a standard PCB layout using Altium Designer

by chili-chips-ba
Peripheral Component Interconnect (PCI) has taken the Express lane long ago, moving to xGbps SerDes. Now for the first time in opensource on the Host side too. Our project roots for the Root Port in 4 ways: |1|openRTL |2|openBFM with unique SIM setup, way faster than vendor's |3|openSW stack |4|one-of-a-kind open backplane.
by wangguanan
A strong implementation of PCB (Beyond Part Models), outperforming all existing implementations.

by RicardoJCMarques
EasyCAM5000 is collection of CAM tools for Makers. It includes EasyTrace5000 for PCB fabrication/prototyping and EasyShape5000 for 2.5-3D milling + 4th axis. It's 100% web-based, client-side, open-source and free to use.
by linorobot
Indoor/Outdoor Positioning System based on Decawave's DWM1000 Ultra Wide Band transceivers.

by siderakb
Pro Micro/Elite-Pi compatible RP2040 board with USB-C, 8MB flash and up to 25 GPIOs

by rniwase
Board for converting SDTV analog video to MIPI CSI-2 using Analog Devices ADV7280A-M.

by OpenDosimeter
Open-source project for a low-cost battery-powered personal X-ray dosimeter! Using a custom PCB powered by a Raspberry Pico with an X-ray sensor (LYSO crystal + SiPM assembly)

by SurvivorGrim
PipBoy-Pi5 Project. A how to guide on building your own functional PipBoy from Fallout!

by jsanpe
A Composite & S-video to Component transcoder for the OSSC

by BEEMB
Battery Health Monitor A compact device for monitoring the State of Health (SoH) and State of Charge (SoC) of lithium batteries. It uses the BQ27441 fuel gauge IC and BQ24075 charger IC, along with an ATmega328P microcontroller, to provide real-time battery data and display it through LED bars.

by JohSchneider
a handheld gaming system build around the raspberry-pi zero running emulationstation

by Swyter
An experimental PC adapter for EPCOT —the PlayStation®VR2 headset— that splits USB Type-C® into DisplayPort video, USB 3 data and power. Intercepting its DP-AUX/SBU and CC side channels.
by UzixLS
Yet another Dendy (Famicom) clone - 8-bit home video game console
by DAI-Maker-Lab
An open source sonar stream gauge designed to give early warning of flood conditions to residents in vulnerable areas.
by UzixLS
Converts RGB + Sync analog signal to S-Video (and also Composite).
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.