
DonCon2040
by ravinrabbid
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

by ravinrabbid
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

by KabukiFlux
JAMMA Xbox360 wired controller for RGBUNTU/PI cheap
by Loewe111
PCB for controlling LED Strips with WLED, made to fit into a DIN Rail Breaker Box

by steelpuxnastik
DIY-friendly photointerrupter microswitch/lamp holder 2-in-1 for generic 100mm Chinese arcade buttons. Enables an OBSA-LHSXF+OBSA-100UMQ-like setup at low cost with generic parts.

by Rolel
A replacement PCB for the SEGA Digital Sound Boardscused on several SEGA arcade games
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.