
Project Hydra Meshtastic Pcb
by Hydra-Designs
A minimalist 1W LoRA PCB design for Meshtastic-device firmware

by Hydra-Designs
A minimalist 1W LoRA PCB design for Meshtastic-device firmware
by IgrikXD
A compact hardware device for transmitting WSPR messages based on the SI5351 clock generator, using GPS for transmission timing synchronization and automatic QTH locator calculation.

by Tropaion
This is a ZigBee device to collect data from smartmeters using the DLMS/COSEM protocol.

by b1scuitdev
E07xESP32C5 is a Sub-GHz & ESP32-C5 module for Flipper Zero. It includes an EBYTE E07-433M20S (PA+LNA), microSD slot, UART pads for GPS, 5V output and a 4-layer PCB with solid ground planes for RF performance.
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.