Texas InstrumentsOfficial resources
LAUNCHXL-CC1310 LaunchPad
A sub-1 GHz SimpleLink wireless MCU development kit built around the CC1310 for low power sensing and long range radio designs.
CC1310
View reference board Loading…
Download ProtoFlowManufacturer library
Exact board pages for widely used TI, ST, Espressif, Arduino, Raspberry Pi and Nordic hardware, linked to the manufacturer’s schematics and design resources.
A sub-1 GHz SimpleLink wireless MCU development kit built around the CC1310 for low power sensing and long range radio designs.
A multi-band SimpleLink development kit for the CC1352P wireless MCU, including sub-1 GHz and 2.4 GHz radios with an integrated power amplifier.
by 8n1
Battery powered door and window sensor with ultra low standby power. Arduino, ESP-12, Reed switch, ATtiny, LDO
by CalPlug
ADE 7953 Arduino style library (Espressif ESP8266 and ESP32 compatible) and demo board PCB design
by wagiminator
Simple USB Power Tester
by hwstar
Hardware for an ESP8266 or Arduino based AC power meter using the Atmel 90E24 energy management chip
by OpenDosimeter
Open-source project for a low-cost battery-powered personal X-ray dosimeter! Using a custom PCB powered by a Raspberry Pico with an X-ray sensor (LYSO crystal + SiPM assembly)
by tvixen
If you have a private powerwall of 18650 cells, this is the battery management system you need. The small PCB is equipped with the cheap Arduino Nano.
by cyijun
An open source Zstack3 gateway powered by ESP8266 and CC2652 modules
by ardiloot
ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).
by galopago
Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board. Is oriented to make small, mobile, battery powered electronic projects work in real conditions in a very short time.
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.