KiCad source
Interfaces & adapters
OCP2PCIe
by KCORES
OCP Mezzanine card V2.0 to standard PCIe slot adapter design
Loading…
Download ProtoFlowby KCORES
OCP Mezzanine card V2.0 to standard PCIe slot adapter design
by rm-controls
CAN peripheral interface for Intel NUC and other x86 device. 用于英特尔 NUC及其它x86架构的平台CAN的外设接口
by YC-Lam
a USB power delivery powerbank pcb based on IP5328P chip, feel free to use it
by DuPAL-PAL-DUmper
This repository contains the KiCad files and the gerber files for the DuPAL boards.
by galopago
Electronic hardware prototyping system. Solderless, robust and open source. Solves the typical problem of the circuit that works on a breadboard but stops working on a real-world setup. Easy to replicate and compatible with virtually every electronic module.
by AndersBNielsen
The FalCAN Probe does USB to CAN, RS-485 and full duplex RS-422
by yasir-shahzad
MCP2515 and TJA1050 CAN Bus Module
by klein0r
PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)
by wodowiesel
GB-Dumper is a PCB project for Gameboy cartridge dumps and backups via Arduino Nano on spi-bus & USB
by KabukiFlux
PCB form Megadrive/Genesis 2 RGB minidin to Scart adapter with 12V DCDC boost (4:3 switching)
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.