Texas InstrumentsOfficial resources
EK-TM4C123GXL Tiva C LaunchPad
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
TM4C123GH6PM
View reference board Loading…
Download ProtoFlowManufacturer library
Exact board pages for widely used TI, ST, Espressif, Arduino, Raspberry Pi and Nordic hardware, linked to the manufacturer’s schematics and design resources.
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
The original RP2040 microcontroller board, with castellated edges, USB and exposed debug pins in a compact dual-inline format.
The RP2350-based successor to Pico, retaining the familiar form factor while adding more performance, memory and security features.
by beekeeb
The Piantor Keyboard is a beginner-friendly, easy-to-solder, 42-key or 36-key, diodeless, low profile aggressive column staggered, hotswappable and non-hotswappable, programmable ergonomic mechanical split keyboard powered by Raspberry Pi Pico or other compatible RP2040 boards. It is based on the Cantor Keyboard.
by tjko
Fanpico: Open Source Programmable PWM (PC) Fan Controller
by jkramarz
The Tick is the next evolution in covert access control system implants for simulating adversary-in-the-middle attacks.
by flatCat1597
ramanPi - the DIY 3D Printable Raman Spectrometer
.jpeg)
by tops4u
Ram Tester for vintage CBM Computer RAM Chips
by ultimachine
3D Printer electronics
by soniccd123
Open Hardware SNES Cartridge with save capability
by microtherion
Arduino software programmer sketch, supporting ISP, HVSP, and HVPP
by anthony-bernaert
FTDI-based JTAG Programmer Circuit for FPGAs
by technoblogy
A self-contained computer with its own display and keyboard, based on an ATmega328 or ATmega1284, that you can program in Lisp.
by tinkrmind
A hardware kit to experiment with inflatable and vacuum based soft robotics.
by freeDSP
The freeUSBi is a real-time programming interface for the freeDSP family.
by robsonsmartins
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
by ytmytm
C128 MMU 256K RAM expansion
by Eliot-Abramo
KiCad Action Plugin for managing multiple PCBs (“sub-boards”) from a single schematic (KiCad 10+).
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.