
Project Hydra Meshtastic Pcb
by Hydra-Designs
A minimalist 1W LoRA PCB design for Meshtastic-device firmware

by Hydra-Designs
A minimalist 1W LoRA PCB design for Meshtastic-device firmware
by MangoIV
A drop-in replacement-PCB for the beautiful le_chiffre

by SnapperGPS
Printed circuit board (PCB) design for snapshot GNSS receiver

by mfkiwl
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
by GaudiLabs
Open Source Theremin Instrument, Shield PCB and Hardware description

by h0lad
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.

by b1scuitdev
E07xESP32C5 is a Sub-GHz & ESP32-C5 module for Flipper Zero. It includes an EBYTE E07-433M20S (PA+LNA), microSD slot, UART pads for GPS, 5V output and a 4-layer PCB with solid ground planes for RF performance.

by maelh
Radio frequency prototype boards (based on MegawattKS' design)

by 4x1md
External bridge SWR meter for Yaesu FT-817ND and other QRP HF transceivers.
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.