Niubi Headphones
by strangeparts
Flexible circuit board design for adding a headphone jack to an iPhone 7
by strangeparts
Flexible circuit board design for adding a headphone jack to an iPhone 7

by visrealm
A replacement for the classic TMS9918A/TMS9929A VDP, powered by a Raspberry Pi Pico

by jasonsbeer
An Amiga 2000 PCB in the EATX form factor.

by amiryeg
How to design a standard PCB layout using Altium Designer
by soniccd123
Open Hardware SNES Cartridge with save capability

by electrified
KiCad schematics and gerbers for a YM sound card for the RC2014. See it in action here: https://www.youtube.com/watch?v=-iLwi9FagFE

by Xyl2k
Board layout for an eeprom powered GB cartridge

by jackw01
Open source raspberry pi handheld retro gaming console

by rhaamo
Amiga 2000 revision 6.2 motherboard re-done in KiCAD. WARNING: stability issue with Wicher 500i, could be noise related from accelerator speed.

by UzixLS
MOS SID sound card for ZX Spectrum

by Alex-2-Graf
Leningrad-2. Russian ZX Spectrum clone (2025 Revision). Modernized schematic & PCB with onboard RGB2VGA/HDMI converter, AY-3-8910 sound, and expansion bus adapters.

by KabukiFlux
Small PCB mod to mix the sync in the RGBpi cable to solve sync issues
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.