Texas InstrumentsOfficial resources
EK-TM4C123GXL Tiva C LaunchPad
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
TM4C123GH6PM
View reference board Loading…
Download ProtoFlow37 published boards whose schematic and layout source is public — KiCad, EAGLE, Altium and EasyEDA projects you can read, fork and build on. Every entry links to the original repository and names its licence.
Exact board pages for widely used TI, ST, Espressif, Arduino, Raspberry Pi and Nordic hardware, linked to the manufacturer’s schematics and design resources.
An 80 MHz Arm Cortex-M4F LaunchPad built around the TM4C123GH6PM, with USB device and host support plus BoosterPack headers.
An 80 MHz Arm Cortex-M0+ development kit for the MSPM0G3507 with on-board debug, sensors and high speed ADC demonstration circuitry.
A sub-1 GHz SimpleLink wireless MCU development kit built around the CC1310 for low power sensing and long range radio designs.
A multi-band SimpleLink development kit for the CC1352P wireless MCU, including sub-1 GHz and 2.4 GHz radios with an integrated power amplifier.
An STM32 Nucleo-64 board based on the STM32F401RE, with an integrated ST-LINK debugger and Arduino Uno compatible expansion headers.
An STM32F407 discovery board with audio, motion sensing, USB OTG and an integrated ST-LINK debugger for Cortex-M4 development.
by wagiminator
T12 Quick Heating Soldering Station
KiCad sourceby Hanqaqa
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
KiCad sourceby Chrismettal
Backpack-style addon boards for the Flipper Zero!
by ExpressLRS
Open-source PCB designs, schematics, and 3D-printable cases for ExpressLRS TX modules and receivers
by agamrossen
Open-source acoustic drone detection. It hears the propellers, not the radio, so it works against fibre-optic FPV aircraft that emit no signal at all.
by OpenGammaProject
☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.
by MilosRasic98
Open-source device for measuring cardiograpgy signals with a GUI for easier handling and additional software for analyzing the data.
by tjko
Fanpico: Open Source Programmable PWM (PC) Fan Controller
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.