HX-6X6X7.3-CJ FT THROUGH HOLE

by hanxia(韩下)User input and reset controls are common uses for hanxia's HX-6X6X7.3-CJ FT THROUGH HOLE tactile switch. The part has a through-hole mounting pattern and four terminals, with a 6 mm by 6 mm outline identified in the footprint name. Its KiCad assets provide a four-pin symbol and the KEY-TH_4P-L6.0-W6.0-P4.50-LS6.5-TL footprint containing four pads. An included 3D model helps show the switch in the board assembly, where access to the actuator matters. The files were converted and checked in the editor as part of a real ProtoFlow import. Open this switch directly in ProtoFlow to place it in a project.