
Easyduino
by Hanqaqa
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

by Hanqaqa
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

by Chrismettal
Backpack-style addon boards for the Flipper Zero!
by Ttl
FMCW radar design files
by Envious-Data
An open source RP2040 MCU Board Family

by maxlab-io
Tokay AI Camera - ESP32 camera development board

by oskirby
Logicbone ECP5 Development Board

by Franzininho
Placa Franzininho DIY - Placa compatível com Arduino no formato DIY para oficinas de soldagem

by 10x-Aero
A 6S AM32-compatible ESC built as a proof of concept for learning how to design an ESC from scratch

by Pakequis
A prototype board with connectors for electronic testing and development.

by siderakb
Pro Micro/Elite-Pi compatible RP2040 board with USB-C, 8MB flash and up to 25 GPIOs

by ravinrabbid
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

by vul-os
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
by mohamedboubaker
STM32 and SIM808 GPS tracker with a custom PCB design and support for MQTT and AES-128 encryption.
by CIRCUITSTATE
Open-Source RP2040 Microcontroller Development Board

by yeokm1
Schematics of the reverse engineered Pixmob wristband used in NDP2016. Sample IR brute-force code is available but has not been fully tested in practice.

by cwgstreet
ESP32 wifi enabled quad temperature probe device to monitor bbq meat / pit temperatures with wireless cloud data logging for remote monitoring and push alert notifications

by tomtor
STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip

by KabukiFlux
JAMMA Xbox360 wired controller for RGBUNTU/PI cheap

by atoomnetmarc
Schematic, PCB files, firmware and 3d models for creating the IoT12 solder iron temperature controller for T12 compatible tips.
Every project listed here belongs to its author and is linked to its original repository. Licences are read from the repository metadata and summarised for convenience — check the licence file in the project itself before you manufacture or redistribute a design. ProtoFlow does not host, mirror or verify these files. Index last rebuilt 2026-09-21.