FSR Endstop
by JohnSL
JohnSL maintains FSR Endstop, an open hardware sensor board whose EAGLE source files are public on GitHub. The author describes it as: “Force-Sensitive Resistor controller designed for Delta 3D printers for automatic bed leveling.”
57 people have starred it and 20 have forked it, with the last commit 4 years ago.
What’s in the repository
- EAGLE schematic (.sch) and board (.brd) source files
- Full revision history, so you can see how the board changed between versions
Licence and reuse
Released under MIT, one of the permissive licenses. You can fork the design, change it, manufacture it and sell the result, provided you keep the original copyright and license notice with the files.
Opening it in ProtoFlow
The design was drawn in EAGLE. EAGLE schematic and board files convert into KiCad format, which is the path to take if you want to carry this design into ProtoFlow.
- 01 Select “Edit in ProtoFlow” for opening options. Download the source and open supported KiCad files in the app. Other EDA formats may need conversion.
- 02 Work in the imported local copy: rename nets, swap parts against live distributor stock, re-route, or strip it back to the sub-circuit you actually need.
- 03 Keep the original licence and credit JohnSL if you publish or sell what you build from it.
This page indexes a public repository. The design, the files and the copyright belong to JohnSL; ProtoFlow does not host, mirror or verify them. Details are read from GitHub and refreshed periodically — check the repository for the current state of the project.
