250-203
by WAGO(万可)A three-wire connection such as supply, return, and signal is a typical use for WAGO's 250-203 through-hole terminal block. Assign those conductors in the schematic in the same order they should appear at the terminals so the board layout reflects the wiring order. This conversion was used by 1 ProtoFlow engineer in real designs. In the KiCad set, the three-pin symbol pairs with CONN-TH_250-203, a footprint with three through-hole pads. A 3D model is also included for checking the housing against adjacent components. You can open the terminal block directly in ProtoFlow to lay out the three connections.
Download KiCad files
Source: JLCEDA/EasyEDA Official Library (lceda.cn and easyeda.com). The symbol, footprint, 3D model and part data are © JLCEDA/EasyEDA; ProtoFlow converted them to KiCad format.
Use 250-203 in your design
ProtoFlow is a free, AI-native EDA tool. Drop this part onto a schematic, route a PCB, and let the AI copilot help. The symbol, footprint, and 3D model come in linked and ready.
Free to start. macOS, Windows and Linux. No sign-up to try.

