uDuck is a input device published by insecurityofthings, with public EAGLE design files on GitHub. Check the repository terms before reuse. The project summarises itself as “USB Rubber Ducky for ATTiny85.”
The repository has collected 118 stars and been forked 24 times, with the last commit 6 years ago.
What’s in the repository
- EAGLE schematic (.sch) and board (.brd) source files
- Full revision history, so you can see how the board changed between versions
Licence and reuse
No license is declared on the repository. Publishing files publicly is not the same as granting permission to reuse them, so ask the author before you build on this design.
Opening it in ProtoFlow
The design was drawn in EAGLE. EAGLE schematic and board files convert into KiCad format, which is the path to take if you want to carry this design into ProtoFlow.
- 01 Select “Edit in ProtoFlow” for opening options. Download the source and open supported KiCad files in the app. Other EDA formats may need conversion.
- 02 Work in the imported local copy: rename nets, swap parts against live distributor stock, re-route, or strip it back to the sub-circuit you actually need.
- 03 Keep the original licence and credit insecurityofthings if you publish or sell what you build from it.
This page indexes a public repository. The design, the files and the copyright belong to insecurityofthings; ProtoFlow does not host, mirror or verify them. Details are read from GitHub and refreshed periodically — check the repository for the current state of the project.
