Arduino Walkie Talkie Instructable is a community-built open hardware project. hoilett publishes the full EAGLE project on GitHub for anyone to study or build. The author describes it as: “Create a simple walkie talkie using two Arduinos and two nRF24 modules.”
30 people have starred it and 12 have forked it, with the last commit 10 years ago.
What’s in the repository
- EAGLE schematic (.sch) and board (.brd) source files
- A project site with further documentation
- Full revision history, so you can see how the board changed between versions
Licence and reuse
Released under MIT, one of the permissive licenses. You can fork the design, change it, manufacture it and sell the result, provided you keep the original copyright and license notice with the files.
Opening it in ProtoFlow
The design was drawn in EAGLE. EAGLE schematic and board files convert into KiCad format, which is the path to take if you want to carry this design into ProtoFlow.
- 01 Select “Edit in ProtoFlow” for opening options. Download the source and open supported KiCad files in the app. Other EDA formats may need conversion.
- 02 Work in the imported local copy: rename nets, swap parts against live distributor stock, re-route, or strip it back to the sub-circuit you actually need.
- 03 Keep the original licence and credit hoilett if you publish or sell what you build from it.
This page indexes a public repository. The design, the files and the copyright belong to hoilett; ProtoFlow does not host, mirror or verify them. Details are read from GitHub and refreshed periodically — check the repository for the current state of the project.